{"title":"Gradient Filament","description":null,"products":[{"product_id":"zyltech-pla-filament-1-75mm-1kg-2-2lbs-3d-printer-filament-desert-canyon-matte-rainbow-gradient","title":"ZYLtech PLA Filament 1.75mm 1kg (2.2lbs) 3D Printer Filament - Desert Canyon Matte Rainbow Gradient","description":"\u003cp dir=\"ltr\"\u003eZYLtech Desert Canyon Matte Rainbow Gradient is a PLA filament that shifts through a gradient of colors along the spool, with a smooth matte finish. It comes on a 1kg (2.2lb) spool in 1.75mm diameter. It feeds smoothly and consistently on most standard 3D printers, for both beginners and experienced users.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy ZYLtech PLA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent performance:\u003c\/strong\u003e Made from high-quality thermoplastic polymers for exceptional print quality, so your prints keep their color from start to finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTight tolerance:\u003c\/strong\u003e ±0.02mm diameter tolerance for steady feed rates and reliable extrusion on both Bowden and Direct Drive setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable:\u003c\/strong\u003e ZYLtech’s number one goal is the most reliable, strongest filament at the best price possible, so you can count on it for durable functional parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality controlled:\u003c\/strong\u003e Every spool is tested by ZYLtech for quality and consistency, using top quality US-based raw materials and additives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor consistent:\u003c\/strong\u003e ZYLtech’s chemist and quality control department work together so every roll matches the last.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBrand: ZYLtech\u003c\/li\u003e\n\u003cli\u003eSeries: Matte Rainbow Gradient\u003c\/li\u003e\n\u003cli\u003eMaterial: PLA\u003c\/li\u003e\n\u003cli\u003eColor: Desert Canyon\u003c\/li\u003e\n\u003cli\u003eFinish: Matte\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eDiameter Tolerance: ±0.02mm\u003c\/li\u003e\n\u003cli\u003eNet Weight: 1kg (2.2lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZYLtech","offers":[{"title":"Default Title","offer_id":67655146144061,"sku":"FMT-RNB-DCY","price":24.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0273\/4915\/5945\/files\/fmt-rnb-dcy_desert_canyon_matte_rainbow_gradient_filament.jpg?v=1791501774"},{"product_id":"zyltech-pla-dual-gradient-silk-filament-1-75mm-1kg-2-2lbs-3d-printer-filament-graphite-rose","title":"ZYLtech PLA Dual Gradient Silk Filament 1.75mm 1kg (2.2lbs) 3D Printer Filament - Graphite Rose","description":"\u003cp dir=\"ltr\"\u003eZYLtech Dual Gradient Silk in Graphite Rose moves between a deep graphite gray and a rich rose red, giving prints a moody, elegant look. Two alternating colors gradually replace each other along the filament, which adds subtle color variation to your prints without needing an AMS or a multi-color printer. You can see each color as you rotate your print to different angles. It comes on a 1kg (2.2lb) spool in 1.75mm diameter.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy ZYLtech Dual Gradient Silk\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eGradual color shift:\u003c\/strong\u003e Two colors blend into each other along the spool, with no filament swaps and no multi-color printer needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk finish:\u003c\/strong\u003e A shiny, polished surface that makes prints stand out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable:\u003c\/strong\u003e ZYLtech’s number one goal is the most reliable filament at the best price possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality controlled:\u003c\/strong\u003e Every spool is tested by ZYLtech for quality and consistency, using top quality US-based raw materials and additives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor consistent:\u003c\/strong\u003e ZYLtech’s chemist and quality control department work together so every roll matches the last.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRecommended Print Settings\u003c\/strong\u003e\u003cbr\u003e Like all silk filament, dual gradient silk needs a higher nozzle temperature and lower speed. Start with these settings and adjust to your results. A generic silk profile is a good starting point in most slicers.\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter speed:\u003c\/strong\u003e Slower than 100 mm\/s. Slower speeds give a glossier finish and stronger layer adhesion. With settings tuned well, successful prints at 200-300 mm\/s are possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e Start at 220 or 230°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling:\u003c\/strong\u003e Silk needs good cooling because of the higher print temperature, but cooling too fast weakens layer adhesion. Find the balance for your printer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Silk filament, in general, has weaker layer adhesion because of the additive that makes it shiny. It is better for aesthetic parts than for structural parts.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBrand: ZYLtech\u003c\/li\u003e\n\u003cli\u003eMaterial: PLA Silk, Dual Gradient\u003c\/li\u003e\n\u003cli\u003eColor: Graphite Rose (Graphite Gray\/Rose Red)\u003c\/li\u003e\n\u003cli\u003eFinish: Silk\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eDiameter Tolerance: ±0.02mm\u003c\/li\u003e\n\u003cli\u003eNet Weight: 1kg (2.2lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZYLtech","offers":[{"title":"Default Title","offer_id":67655147127101,"sku":"FMT-DGT-GRS","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0273\/4915\/5945\/files\/fmt-dgt-grs_graphite_rose_dual_gradient_filament.jpg?v=1791559799"},{"product_id":"zyltech-pla-dual-gradient-silk-filament-1-75mm-1kg-2-2lbs-3d-printer-filament-coral-dream-orange-pink","title":"ZYLtech PLA Dual Gradient Silk Filament 1.75mm 1kg (2.2lbs) 3D Printer Filament - Coral Dream (Orange\/Pink)","description":"ZYLtech Dual Gradient Silk in Coral Dream moves from warm orange to bright pink, capturing the look of a coral reef at sunset and adding a dreamy tropical feel to any project. Two alternating colors gradually replace each other along the filament, which adds subtle color variation to your prints without needing an AMS or a multi-color printer. You can see each color as you rotate your print to different angles. It comes on a 1kg (2.2lb) spool in 1.75mm diameter.\n\nWhy ZYLtech Dual Gradient Silk\n\nGradual color shift: Two colors blend into each other along the spool, with no filament swaps and no multi-color printer needed.\nSilk finish: A shiny, polished surface that makes prints stand out.\nReliable: ZYLtech’s number one goal is the most reliable filament at the best price possible.\nQuality controlled: Every spool is tested by ZYLtech for quality and consistency, using top quality US-based raw materials and additives.\nColor consistent: ZYLtech’s chemist and quality control department work together so every roll matches the last.\n\nRecommended Print Settings\nLike all silk filament, dual gradient silk needs a higher nozzle temperature and lower speed. Start with these settings and adjust to your results. A generic silk profile is a good starting point in most slicers.\n\nPerimeter speed: Slower than 100 mm\/s. Slower speeds give a glossier finish and stronger layer adhesion. With settings tuned well, successful prints at 200-300 mm\/s are possible.\nNozzle temperature: Start at 220 or 230°C.\nPart cooling: Silk needs good cooling because of the higher print temperature, but cooling too fast weakens layer adhesion. Find the balance for your printer.\n\nPlease Note: Silk filament, in general, has weaker layer adhesion because of the additive that makes it shiny. It is better for aesthetic parts than for structural parts.\n\nSpecifications\n\nBrand: ZYLtech\nMaterial: PLA Silk, Dual Gradient\nColor: Coral Dream (Orange\/Pink)\nFinish: Silk\nDiameter: 1.75mm\nDiameter Tolerance: ±0.02mm\nNet Weight: 1kg (2.2lbs)","brand":"ZYLtech","offers":[{"title":"Default Title","offer_id":67655146799421,"sku":"FMT-DGT-CRM","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0273\/4915\/5945\/files\/fmt-dgt-crm_coral_dream_dual_gradient_filament.jpg?v=1791501849"}],"url":"https:\/\/robidouxinc.com\/collections\/gradient-filament.oembed","provider":"Robidoux Inc.","version":"1.0","type":"link"}