{"product_id":"zyltech-pla-dual-color-silk-filament-1-75mm-1kg-2-2lbs-3d-printer-filament-shadow-blade-silver-black","title":"ZYLtech PLA Dual Color Silk Filament 1.75mm 1kg (2.2lbs) 3D Printer Filament - Shadow Blade (Silver\/Black)","description":"\u003cp dir=\"ltr\"\u003eZYLtech Dual Color Silk in Shadow Blade pairs silk black, which suggests mystery and depth, with silver, like a gleaming blade in the shadows. Two individual colors are extruded into one filament strand, so you can see each color as you rotate your print to different angles. It comes on a 1kg (2.2lb) spool in 1.75mm diameter. This dual color filament is an affordable way to get eye-catching multicolor prints with a silk finish, and it is part of a line with 8 unique color options.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy ZYLtech Dual Color Silk\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo colors, one strand:\u003c\/strong\u003e Dual color extrusion gives a striking multicolor look without changing filament.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk finish:\u003c\/strong\u003e A shiny, polished surface that makes prints stand out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable:\u003c\/strong\u003e ZYLtech’s number one goal is the most reliable filament at the best price possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality controlled:\u003c\/strong\u003e Every spool is tested by ZYLtech for quality and consistency, using top quality US-based raw materials and additives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor consistent:\u003c\/strong\u003e ZYLtech’s chemist and quality control department work together so every roll matches the last.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRecommended Print Settings\u003c\/strong\u003e\u003cbr\u003e Like all silk filament, dual color silk needs a higher nozzle temperature and lower speed. Start with these settings and adjust to your results. A generic silk profile is a good starting point in most slicers.\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter speed:\u003c\/strong\u003e Slower than 60 mm\/s. Slower speeds give a glossier finish and stronger layer adhesion. With settings tuned well, successful prints at 200 mm\/s are possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e Start at 220°C. Best range is 200-230°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling:\u003c\/strong\u003e Silk needs good cooling to avoid surface defects and warping, but cooling too fast weakens layer adhesion. Find the balance for your printer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop and bottom infill patterns:\u003c\/strong\u003e Concentric and monotonic give the most dramatic, beautiful look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpool and filament routing:\u003c\/strong\u003e Route the filament to the extruder and hot end without twists or kinks, ideally under constant tension.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Silk filament, in general, has weaker layer adhesion because of the additive that makes it shiny. It is better for aesthetic parts than for structural parts.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBrand: ZYLtech\u003c\/li\u003e\n\u003cli\u003eMaterial: PLA Silk, Dual Color\u003c\/li\u003e\n\u003cli\u003eColor: Shadow Blade (Silver\/Black)\u003c\/li\u003e\n\u003cli\u003eFinish: Silk\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eDiameter Tolerance: ±0.02mm\u003c\/li\u003e\n\u003cli\u003eNet Weight: 1kg (2.2lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZYLtech","offers":[{"title":"Default Title","offer_id":67655146602813,"sku":"FMT-DUO-SAB","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0273\/4915\/5945\/files\/fmt-duo-sab_shadow_blade_dual_filament.jpg?v=1791501822","url":"https:\/\/robidouxinc.com\/products\/zyltech-pla-dual-color-silk-filament-1-75mm-1kg-2-2lbs-3d-printer-filament-shadow-blade-silver-black","provider":"Robidoux Inc.","version":"1.0","type":"link"}